18

Uninstalling the USB Drivers for Windows 2000, continued

6. In the Add/Remove Hardware Wizard window,
click USB Cable Modem Adapter, and then
click Next.
7. In the Add/Remove Hardware Wizard window,
click Yes, I want to uninstall this device, and
then click Next.
8. In the Add/Remove Hardware Wizard window,
click Finish to complete the uninstall procedure
and to close the Add/Remove Hardware
Wizard window.

Renewing the IP Address for Windows 95/98/ME

If your PC cannot access the Internet after the
cable modem is online, it is possible that your
PC did not renew its IP address. Follow these
steps to renew the IP address on your PC.
1. Click Start, and then click Run to open the
Run window.
2. Type winipcfg in the Open field, and click
OK to execute the winipcfg command. The IP
Configuration window appears.
3. Click the down arrow to the right of the top
field, and select the Ethernet adapter that is
installed on your PC. The IP Configuration
window displays the Ethernet adapter
information.
4. Click Release, and then click Renew. The IP
Configuration window displays a new IP
address.
5. Click OK to close the IP Configuration
window.
USB Driver Uninstallation, continued Renew the IP Address