AFE325
For The Electrician
Electrical connections:
Follow All Local, State & National Codes
Check the nameplate for voltage and current requirements. An electrical cord is not supplied. Connect the AFE325 to a separate electrical circuit. Wiring to the machine must conform to all codes. A licensed electrician may be required in some situations. The electrical connection is made in the control box inside the machine.
This unit must be grounded.
Route the electrical power cord thru the corner post to the control box inside the cabinet.
To make the electrical connection, remove the following parts:
∙Top panel
∙Bin door
∙Rubber moulding
∙Left moulding cover
∙Left track
∙Upper front panel
∙Upper baffle
∙Left side panel
∙Front louvered panel
∙Control box cover
If the machine will be started up later, after making the electrical connections, replace all panels.
Top Panel |
| Control Box Cover |
Ice Discharge Tube |
| |
|
| |
Electrical | (Ref) | Upper Front |
| ||
| Panel | |
Inlet |
| |
|
| |
|
| Bin Door |
|
| Spacer |
|
| Bin Door |
| Serial Number |
|
| Plate | Left Track |
|
| |
Left Side |
| Left Moulding |
Panel |
| |
| Cover | |
|
| |
Front Louvered |
| Upper Baffle |
Panel |
|
|
August 1994
Page 5
