In case you want even more detailed figures of air pressure or tuning hints, you can download a program under
SET-UP OF OTHER
SHOCK MODELS:
Scott strongly recommends using only the Scott Nude TC Shock with the Spark bike, as we designed both parts for a perfect matching combination with a linear suspension rate.
If you want to use a different rear shock model than the one originally on the bike, please make sure that the shock will not in any position hit the frame and cause a damage to the frame.
Please follow the instruction below:
Please make sure that the rear shock or its accessory parts do not touch the frame when mounting or suspending.
For doing so release the air/remove the coil, install the shock and compress the shock completely.
SCOTT SEALED CABLE ROUTING:
The direct and straight cable system on all our full suspension models allows Smart Cable Routing which is very resistant against water and dirt.
To change the cables simply unscrew and open the cable brackets on the downtube.
MECHANICS HINT
The outer housing of the cables can also be fixed on the bottle cage with cable fixers, the two brackets below the cage are not needed anymore..
Important: Note that you have to mount the Scott Nude TC Shock always as shown under- neath.
Mounting the rear shock in a different position can cause severe damages to the frame, the linkage levers and the rear shock.
Important: After a dismantlement of the rear shock, both fixing bolts should be tightened with a tightening torque of
If this is not done correctly the rear shock can be damaged.
If the shock touches the frame while doing so, do not use this shock in order to avoid damage to frame, swin- garm or shock.
ENGLISH
DEUTSCH
FRANÇAIS
12 OWNER’S MANUAL 2007 | 13 |
