Medalist 1080sl SCSI Installation Guide, August 1995 | 7 |
J8. Options jumper block
33 31 29 27 25 23 21 19 17 15 13 11 9 7 5 3 1
34 32 30 28 26 24 22 20 18 16 14 12 10 8 6 4 2
Circuit board side up.
Note.
1.All other pins are reserved. Do not use them.
2.Jumpers on pins 28 and 30 and 32 and 34 are spares; these pins do not require jumpers.
Spares
SCSI ID 0
SCSI ID 1
SCSI ID 2
SCSI ID 3 (default)
SCSI ID 4
SCSI ID 5
SCSI ID 6
SCSI ID 7
Reserved
Do not use
Remote LED connection
Remote start
Enable parity (default)
Disable terminator (default is enable)
Power to drive terminator only
Power from bus, drive terminator disabled
Power to drive terminator and to SCSI bus (default)
Power to SCSI bus only
