Seagate ST480HM000 manual Operating vibration, Nonoperating vibration, Electromagnetic Immunity

2.8.6.1Operating vibration

The maximum random vibration levels that the drive may experience while meeting the performance standards specified in this document are specified below. This specification does not cover connection issues that may result from testing at this level.

20–2000 Hz

11.08 Grms

2.8.6.2Nonoperating vibration

The maximum random nonoperating vibration levels that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation are specified below.

20–2000 Hz

11.08 Grms

2.9ELECTROMAGNETIC IMMUNITY

When properly installed in a representative host system, the drive operates without errors or degradation in performance when subjected to the radio frequency (RF) environments defined in the following table:

Table 5 Radio frequency environments

TEST	DESCRIPTION	PERFORMANCE	REFERENCE
		LEVEL	STANDARD
Electrostatic discharge	Contact, HCP, VCP: ± 4 kV; Air: ± 8 kV	B	EN 61000-4-2: 95
Radiated RF immunity	80 to 1000 MHz, 3 V/m,	A	EN 61000-4-3: 96
	80% AM with 1 kHz sine		ENV 50204: 95
	900 MHz, 3 V/m, 50% pulse modulation @ 200 Hz
Electrical fast transient	± 1 kV on AC mains, ± 0.5 kV on external I/O	B	EN 61000-4-4: 95
Surge immunity	± 1 kV differential, ± 2 kV common, AC mains	B	EN 61000-4-5: 95
Conducted RF immunity	150 kHz to 80 MHz, 3 Vrms, 80% AM with 1 kHz sine	A	EN 61000-4-6: 97
Voltage dips, interrupts	0% open, 5 seconds	C	EN 61000-4-11: 94
	0% short, 5 seconds	C
	40%, 0.10 seconds	C
	70%, 0.01 seconds	B

SEAGATE 600 SSD PRODUCT MANUAL, REV. A 12