Seagate ST480HM001, ST120HM001, ST120HM000, ST240HM001, ST240HM000, ST480HM000 manual Fffeh

WORD	DESCRIPTION	VALUE
67	Minimum PIO transfer cycle time without flow control (120ns)	0078H
68	Minimum PIO transfer cycle time with IORDY flow control (120ns)	0078H
69	Additional Features and Commands supported.	0100H
	Trim Features supported, DMA commands supported
70	Reserved	0000H
71–74	Reserved for ATAPI	0000H
75	Queue depth	001FH
76	Serial ATA Capabilities Supported	870EH
77	Reserved for Serial ATA	0006H
78	Serial ATA features supported	0056H
79	Serial ATA features enabled	0040H
80	Major version number	01F0H
81	Minor version number	0029H
82	Commands and feature sets supported	746BH
83	Commands and feature sets supported	7401H
84	Commands and feature sets supported	4163H
85	Commands and feature sets supported or enabled	7469H
86	Commands and feature sets supported or enabled	B401H
87	Commands and feature sets supported or enabled	4163H
88	Ultra DMA support and current mode (see note following this table)	407FH
89	Security erase time	0004H
90	Enhanced security erase time	0000H
91	Current APM level value	0000H
92	Master password Identifier	FFFEH
93	Hardware reset result	0000H
94	Reserved	0000H
95–99	ATA-reserved	0000H
100–103	Total Number of User Addressable Logical Blocks for 48-bit commands. These words	480GB model = 937,703,088
	are required for drives that support the 48-bit addressing feature. Maximum value:	240GB model = 468,862,128
	0000FFFFFFFFFFFFh	120GB model = 234,441,648
104	Reserved for Streaming Command Set	0000H
105	Maximum number of 512-byte blocks of LBA Range Entries	0001H
	(see 4.18.3.2) per DATA SET MANAGEMENT command
106	Physical sector size / logical sector size	6003H
107	Inter-seek delay for ISO 7779 standard acoustic testing	0000H
108–111	World wide name	XXXXH
112–115	Reserved	0000H
116	Reserved for TLC	0000H
117–118	Logical sector size (DWord)	0000H
119	Commands and feature sets supported	4014H
120	Commands and feature sets supported or enabled	4014H
121–126	Reserved for expanded supported and enabled settings	0000H
SEAGATE 600 SSD PRODUCT MANUAL, REV. A		25