34 ST12450W/WD Installation Guide, Rev. B
Note.Signal ground on the power control board (PCB)
and the head and disc assembly (HDA) are con-
nected together in this drive and you cannot sepa-
rate them. The equipment in which you have
mounted the drive is connected directly to the HDA
and PCB without electrically isolating shock mounts.
Maximizing the conductive contact area between
HDA ground and system ground may reduce radi-
ated emissions. If you do not want the system
chassis to be connected to the HDA/PCB ground,
you must provide a nonconductive (electrically
isolating) method of mounting the drive in the host
system. This may increase radiated emissions and
is the system designer’s responsibility.
Hinweis:
Die Signalerde auf der Stromregelungskarte (PCB)
und der Kopf- und Festplatteneinheit (HDA) sind in
diesem Laufwerk miteinander verbunden und
können nicht getrennt werden. Das Gerät, in das
Sie das Laufwerk eingebaut haben, ist ohne
elektrisch isolierende Stoßdämpfer direkt an die
HDA und PCB angeschlossen. Die
elektromagnetische Strahlung kann reduziert
werden, indem Sie eine möglichst große leitende
Kontakfläche zwischen der HDA-Erdung und der
Systemerdung vorsehen. Wenn Sie das