Seagate ST3146756SS (FDE), ST3146854LC, ST3146356SSIM manual Inquiry data, Bytes Data hex

9.3.1Inquiry data

Table 22 lists the Inquiry command data that the drive should return to the initiator per the format given in the SAS Interface Manual.

Table 22:	Inquiry data
Bytes	Data (hex)
0-15	00	00	xx**	12	8B	00	10	0A	53	45	41	47	41	54	45	20	Vendor ID
16-31	[53	54	33	34	35	30	38	35	36	53	53]1	20	20	20	20	20	Product ID
32-47	R#	R#	R#	R#	S#	S#	S#	S#	S#	S#	S#	S#	00	00	00	00
48-63	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00
64-79	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00
80-95	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00	00
96-111	00	43	6F	70	79	72	69	67	68	74	20	28	63	29	20	32*	*Copyright
112-127	30*	30*	37*	20	53	65	61	67	61	74	65	20	41	6C	6C	20	notice
128-143	72	69	67	68	74	73	20	72	65	73	65	72	76	65	64	20

*Copyright year (changes with actual year).

**SCSI Revision support. Refer to the appropiate SPC release documentation for definitions.

PP10 = Inquiry data for an Inquiry command received on Port A. 30 = Inquiry data for an Inquiry command received on Port B.

R#	Four ASCII digits representing the last four digits of the product firmware release number.
S#	Eight ASCII digits representing the eight digits of the product serial number.
[ ]	Bytes 18 through 26 reflect model of drive. The table above shows the hex values for Model ST3450856SS.
	Refer to the values below for the values of bytes 18 through 27 of you particular model:
	ST3450856SS	53	54	33	34	35	30	38	35	36	53	53
	ST3450056SS (FDE)	53	54	33	34	35	30	30	35	36	53	53
	ST3300656SS	53	54	33	33	30	30	36	35	36	53	53
	ST3300056SS (FDE)	53	54	33	33	30	30	30	35	36	53	53
	ST3146356SS	53	54	33	31	34	36	33	35	56	53	53
	ST3146756SS (FDE)	53	54	33	31	34	36	37	35	56	53	53

Cheetah 15K.6 SAS Product Manual, Rev. B 57