BridgeWave AR60X manual Installation, Equipment Unpacking

AR60X Installation Manual

3 Installation

3.1 General

It is recommended that installation personnel read this section in its entirety prior to installing the BridgeWave System. During a particular phase of installation, the user may refer directly to the applicable subsection.

The Installation section is comprised of seven subsections covering the procedures and guidelines for installing the BridgeWave Radio System.

Subsections 3 through 3.4 contain information necessary to prepare for the equipment installation.

Subsections 3.5 through 3.8 covers equipment installation procedures.

Subsections 3.9 and 3.10 contains information necessary for aligning the antennas.

3.2 Equipment Unpacking

The radio system equipment will arrive in two boxes—one box for the low band radio and one box for the high band radio. Locate the correct box (low band or high band) before beginning installation by checking the label on the outside of the box or on the radio itself. It is recommended that the shipping cartons and packing materials be retained in the event that it is necessary to return any equipment.

Unpacked radios can be identified by the color of their labels found on their front faces or inside the unit after removing the plastic back weather cover. The blue color label indicates a high band radio and the red color label indicates a low band radio. See Figure 3­5 for further details.

580­00517, rev B 8