AR60X Installation Manual

3.4 Installation Tools

The following tools, not provided by BridgeWave, are required for installing the radio and the antenna:

Screwdriver, slotted 0.1 inch (2.5mm) wide

Open­end wrench 11/32 (9mm)

Open­end wrench 9/16 (14mm), 2 ea.

Open­end wrench 1/2 (13mm)

Ratchet with 6 inch (15cm) extension and 9/16 inch (14mm) deep socket Wire stripper/cutter/crimp tool (10­16 gauge)

Electrical tape

Fish tape for pulling cable

Cable tie wraps

Level

Hand­held DVM (digital voltmeter) with standard banana plug receptacles

580­00517, rev B

10

Page 16
Image 16
BridgeWave AR60X manual Installation Tools