Seagate ST3450056SS (FDE), ST3146854LC Mechanical specifications, Electromagnetic susceptibility

Models: ST3450056SS (FDE) ST3300056SS (FDE) ST3146756SS (FDE) ST3146854LC ST3146356SSIM

1 90
Download 90 pages 43.07 Kb
Page 44
Image 44

Users should use caution exposing any electronic components to uncontrolled chemical pollutants and corro- sive chemicals as electronic drive component reliability can be affected by the installation environment. The sil- ver, copper, nickel and gold films used in Seagate products are especially sensitive to the presence of sulfide, chloride, and nitrate contaminants. Sulfur is found to be the most damaging. In addition, electronic components should never be exposed to condensing water on the surface of the printed circuit board assembly (PCBA) or exposed to an ambient relative humidity greater than 95%. Materials used in cabinet fabrication, such as vulca- nized rubber, that can outgas corrosive compounds should be minimized or eliminated. The useful life of any electronic equipment may be extended by replacing materials near circuitry with sulfide-free alternatives.

6.4.8Electromagnetic susceptibility

See Section 2.1.1.1.

6.5Mechanical specifications

Refer to Figure 12 for detailed physical dimensions. See Section 8.3, “Drive mounting.”

Height:

1.028 in

26.11 mm

Width:

4.010 in

101.85 mm

Depth:

5.787 in

146.99 mm

Weight:

ST3450856SS: 1.563 pounds

0.709 kilograms

 

ST3450056SS

 

 

ST3300656SS: 1.53 pounds

0.694 kilograms

 

ST3300056SS

 

 

ST3146356SS: 1.487 pounds

0.674 kilograms

 

ST3146756SS

 

40

Cheetah 15K.6 SAS Product Manual, Rev. B

Page 44
Image 44
Seagate ST3450056SS (FDE), ST3146854LC, ST3146756SS (FDE) manual Mechanical specifications, Electromagnetic susceptibility