![](/images/new-backgrounds/1109884/109884133x1.webp)
Recommended mating
Hot plug version (with ground | |||
Seagate P/N: | 77678703 |
|
|
Amp US P/N: | with polarization | ||
or |
|
| |
Amp US P/N: | without polarization | ||
or |
|
| |
Amp Japan P/N: |
|
|
Right-angle to PCBA connectors
Seagate P/N: 77678559
Amp US P/N:
Amp Japan P/N:
For additional information call Amp FAX service at
SCSI ID 7 [5]
Pin 1
(check your
adapter for Pin 1 location)
[1]
Host
Adapter
PCB
[3]
“LW” Model
Drive
Terminator [7]
[6]
2 through X SCSI devices [4]
SCSI ID 1
SCSI ID 0
[2]
[1]Closed end type
[2]Open end type
[3]Host need not be on the end of the
[4]Total interface cable length must not exceed that specified in ANSI document T10/1365D (including host adapter/initiator). The cable length restriction limits the total number of devices allowed.
[5]SCSI ID7 has highest arbitration priority, then ID15 to ID8 (ID 8 has the very lowest priority).
[6]Last drive on the daisy chain.
[7]
Figure 15. SCSI daisy-chain interface cabling for LW drives
Cheetah 15K.5 SCSI Product Manual, Rev. J | 61 |