38
DB35.3 Series SATA/PATA Product Manual, Rev. F
Identify Device command 29
Idle 27
Idle and Standby timers 10
Idle Immediate 27
Idle mode 10
Idle mode power 8
IEC950 14
Information Technology Equipment 14
Initialize Device Parameters 27
interface 6, 23
interface signals 26
interference 14
internal data-transfer rate OD 6
ISO document 7779 12
J
jumper settings 21
K
Korean RRL 14
L
LBA mode 6
length 7
logical geometry 6
M
maintenance 13
master 21
master/slave 1, 2
Master/slave configuration 21
maximum temperatu re 11
measurement locations 11
modes 26
monitoring 1
mounting the drive 17, 18
N
noise 9
nominal power 3
nonoperating shock 11
nonoperating vibration 12
nonrecoverable read errors 13
O
operating power and current 8
operating shock 11
operating vibration 12
orientation 18
P
PATA interface 26
physical characteristics 7
pins 26
PIO 26
point-to-point 2, 20
power consumption 8
power management 10
power specifications 8
power-management modes 10
Power-on to Ready 7
precautions 18
preventive maintenance 13
programmable power management 10
R
radiated RF immunity 13
radio and television interference 14
radio frequency 13
random track location 8
Read Buffer 27
Read DMA 27
Read DMA Extended 27
Read DMA without Retries 27
read errors 13
Read Log Ext 27
Read Multiple 1, 27
Read Multiple Extended 27
Read Native Max Address 27
Read Native Max Address Extended 27
Read Sectors 27
Read Sectors Extended 27
Read Sectors Without Retries 27
Read Verify Sectors 27
Read Verify Sectors Extended 27
Read Verify Sectors Without Retries 27
read/write power and current 8
Recalibrate 27
recording and interface technology 6
recording density 6
recording heads 1
recording method 6
register 32
relative humidity 11
reliability 13
resistance 9
resistive load 9
RF 13
RoHS 16
S
S.M.A.R.T. commands 33
S.M.A.R.T. Disable Operations 28
S.M.A.R.T. drive monitoring 1
S.M.A.R.T. Enable Operations 28
S.M.A.R.T. Enable/Disable Autosave 28