Seagate ST380020ACE, ST320410ACE Operating vibration, Nonoperating vibration, Drive acoustics

U Series CE Family Product Manual, Rev. A 13

1.8.6.1 Operating vibration

The following table lists the maximum vibration levels that the drive may expe- rience while meeting the performance standards specified in this document.

5–21 Hz	0.02-inch displacement (peak to peak)
22–350 Hz	0.5 Gs acceleration (zero to peak)
351–500 Hz	0.25 Gs acceleration (zero to peak)

1.8.6.2 Nonoperating vibration

The following table lists the maximum nonoperating vibration that the drive may experience without incurring physical damage or degradation in performance when subsequently put into operation.

5–21 Hz	0.2-inch displacement (peak to peak)
22–350 Hz	5.0 Gs acceleration (zero to peak)
351–500 Hz	1.0 Gs acceleration (zero to peak)

1.9 Drive acoustics

Drive acoustics are measured as overall A-weighted acoustic sound power levels (no pure tones). All measurements are generally consistent with ISO document 7779. Sound power measurements were taken under essentially free-field conditions over a reflecting plane. For all tests, the drive was oriented with the cover facing upward.

Note. For seek mode tests, the drive was placed in seek mode only. The number of seeks per second is defined by the following equation:

(Number of seeks per second = 0.4 / (average latency + average access time)

ST380020ACE, ST360020ACE, ST340810ACE and ST320410ACE

Acoustic mode	Idle	Performance Seek
Sound power (bels)	2.7 (typ) 3.0 (max)	2.9 (typ) 3.2 (max)