U Series CE Family Product Manual, Rev. A | 17 |
2.0 Configuring and mounting the drive
This section contains the specifications and instructions for configuring and mounting the drive.
2.1 Handling and static-discharge precautions
After unpacking, and before installation, the drive may be exposed to potential handling and electrostatic discharge (ESD) hazards. Observe the following standard handling and
Caution:
•The SeaShell™ replaces electrostatic discharge (ESD) bags. The SeaShell package is a
•The drive is enclosed in a black, flexible cover called a SeaShield. Do not remove this permanent
•Before handling the drive, put on a grounded wrist strap, or ground yourself frequently by touching the metal chassis of a computer that is plugged into a grounded outlet. Wear a grounded wrist strap throughout the entire installation procedure.
•Handle the drive by its edges or frame only.
•The drive is extremely
•Always rest the drive on a padded, antistatic surface until you mount it in the computer.
•Do not touch the connector pins or the printed circuit board.
•Do not remove the