7.2.1Conducted noise immunity

Noise is specified as a periodic and random distribution of frequencies covering a band from DC to 10 MHz. Maximum allowed noise values given below are peak-to-peak measurements and apply at the drive power connector.

+5 V

=

250 mV pp from 0 to

20 MHz.

+12 V

=

800 mV pp from 100

Hz to 8 KHz.

450 mV pp from 8 KHz to 20 KHz.

250 mV pp from 20 KHz to 5 MHz.

7.2.2Power sequencing

The drive does not require power sequencing. The drive protects against inadvertent writing during power-up and down.

7.2.3Current profiles

The +12V and +5V current profiles are shown in the following figures.

Note: All times and currents are typical. See Section 7.2 for maximum current requirements.

Figure 1. Typical ST3600057FC current profiles

24

Cheetah 15K.7 FC Product Manual, Rev. C

Page 30
Image 30
Seagate ST3450857FC, ST3300557FC, ST3300457FC, ST3300657FC manual Conducted noise immunity, Power sequencing, Current profiles