Power, Fault LED Out | Seagate ST3600057FC specification

10.5.6Power

Power is supplied through the FC-SCA with support for +5 volts and +12 volts. All of the voltage pins in the drive connector are the same length.

Four 12 volt pins provide +12 volt power to the drive. The current return for the +12 volt power supply is through the common ground pins. The supply current and return current must be distributed as evenly as pos- sible among the pins. The maximum current typically occurs while the drive motor is starting.

Three 5 volt pins provide logic power to the drive. The current return for the +5 volt power supply is through the common ground pins. Distribute supply and return current as evenly as possible among the voltage and ground pins.

The mating connector pins use shorter contacts to achieve power surge reductions and to aid in “hot plugging” the drives. There are longer voltage contacts in the connector to enable the drive filter capacitors to charge. Current to the drive through the long charge pins is limited by the system in which the drive operates. Three of the +12 volt pins are shorter to allow capacitive pre-charging through the longer +12 volt charge pin. Two of the +5 volt pins are shorter to allow capacitive precharging through the longer +5 volt charge pin.

10.5.7Fault LED Out

The Fault LED Out signal is driven by the drive when:

•the drive detects failure of both ports

•the drive detects an internal failure

•the drive receives the appropriate fault LED command from the host

The Fault LED Out signal is designed to pull down the cathode of an LED. The anode is attached to the proper +5 volt supply through an appropriate current-limiting resistor. The LED and the current-limiting resistor are external to the drive.

66	Cheetah 15K.7 FC Product Manual, Rev. A

Image 72

Seagate ST3600057FC manual Power, Fault LED Out

Contents

Cheetah 15K.7 FC Standard models Self-Encrypting Drive modelsPage Contents Defect and error management InstallationAbout self-encrypting drives Interface requirements Seagate Technology support services Cheetah 15K.7 FC Product Manual, Rev. a Scope Model Number Capacity Self-Encrypting Drive SED Applicable standards and reference documentation StandardsElectromagnetic compatibility Electromagnetic susceptibility European Union Restriction of Hazardous Substances RoHS Reference documents Ncits TR-20 General description Standard features Media description PerformanceReliability Formatted capacities Factory-installed options User-installed accessoriesProgrammable drive capacity Performance characteristics Internal drive characteristicsSeek performance characteristics Access time General performance characteristics Start/stop timePrefetch/multi-segmented cache control Cache operation Caching write data Prefetch operation Reliability specifications Error ratesRecoverable Errors Unrecoverable Errors Reliability and service Seek errorsInterface errors Preventive maintenance 4 S.M.A.R.T Controlling S.M.A.R.TPerformance impact Milliseconds Temperature Log Page 0Dh Determining ratePredictive failures Thermal monitor State of the drive prior to testing Drive Self Test DSTDST failure definition Implementation Short and extended tests Short test Function Code 001bExtended test Function Code 010b Log page entries Product warranty ShippingProduct repair and return information Physical/electrical specifications AC power requirementsDC power requirements ST3600057FC DC power requirements Gbit Amps ST3450857FC DC power requirements Gbit Amps General DC power requirement notes ST3300657FC DC power requirements Gbit Amps Power sequencing Conducted noise immunityCurrent profiles Typical ST3450857FC current profiles Typical ST3300657FC current profiles Power dissipation 600GB model 450GB models Temperature a. Operating Environmental limits300GB models Relative humidity Effective altitude sea level a. Operating Package size Packaged/product weight Drop height Shock and vibrationShock Recommended mounting Air cleanliness Vibration a. Operating-normalAcoustics Corrosive environment RoHS compliance statement Electromagnetic susceptibility See Section Mechanical specifications Mounting configuration dimensions Controlled access Admin SPAbout self-encrypting drives Data encryption Default password Random number generator RNGDrive locking Data bands Authenticated firmware download Power requirementsSupported commands Cryptographic erase Defect and error management Drive internal defects/errorsDrive error recovery procedures Page FC-AL system errors These values are subject to change Background Media Scan Media Pre-ScanDeferred Auto-Reallocation Idle Read After Write Installation Drive ID/option selectionDrive orientation Cooling Air flow Drive mounting Grounding FC-AL features Fibre Channel link service framesLink services supported Type of frame Interface requirements Fibre Channel task management functions Fibre Channel task management responsesFC Scsi FCP response codes Function name Response code Fibre Channel port login NPort login Plogi payload Bytes Fibre Channel port login accept NPort Login Accept ACC payload BytesProcess Login Plri payload Fibre Channel Process Login Accept Fibre Channel fabric loginProcess Login Accept ACC payload Bytes Fabric Login Flogi payload Bytes Fibre Channel fabric accept login Fabric Login Accept ACC payload Bytes Scsi commands supported Dual port supportFibre Channel Arbitrated Loop options FC-AL options supported Supported commands Cheetah 15K.7 FC Product Manual, Rev. a Cheetah 15K.7 FC Product Manual, Rev. a Background Medium Scan 15h Mode Sense data Inquiry dataCheetah 15K.7 FC inquiry data Bytes Data hex Page Mode Data Header Block Descriptor Ec b2 5c 00 00 02 Miscellaneous operating features and conditions Miscellaneous featuresSupported Feature or condition Miscellaneous status Physical characteristics FC-AL physical interfacePhysical description Connector requirements Electrical descriptionPin descriptions FC-SCA pin descriptions Pin Signal name Signal type Pin Signal name Signal typeFC-AL transmitters and receivers Power Fault LED Out Enable port bypass signals Active LED OutMotor start controls Parallel Enclosure Services Interface ESI 10.5.11 SEL6 through SEL0 ID lines Setting Arbitrated loop physical address Alpa valuesHex Dec Signal characteristics TTL input characteristics provides the TTL characteristicsDevice control codes LED driver signals FC Differential outputFC Differential input Receive eye diagram Eye diagram data values Link rate GHz Seagate Technology support services Presales SupportTechnical Support Warranty Service Data Recovery Services Authorized Service CentersData Recovery Services Call Center Toll-free Direct dial Index Numerics Devctrlcode FCP Mtbf Page See also cooling Page Cheetah 15K.7 FC Product Manual, Rev. a Page Seagate Technology LLC