Seagate ST9200011FS, ST950011FS, ST9100011FS manual Pulsar Product Manual, Rev. a

Drive specification	ST9200011FS		ST9100011FS	ST950011FS
Sustainable 4KB Random IOPs for 5 year Endurance	10,500
(65%/35% R/W 70% Duty Cycle)
Startup current (typical) 5V (peak)	0.83 amps
Voltage tolerance (including noise)	5V ± 5%
Ambient temperature	5° to 60°C (operating)
	–40° to 70°C (nonoperating)
Temperature gradient (°C per hour max)	20°C (operating)
	20°C (nonoperating)
Relative humidity	5% to 95% (operating)
	5% to 95% (nonoperating)
Relative humidity gradient	20% per hour max
Wet bulb temperature (°C max)	37.7 (operating)
	40.0 (nonoperating)
Altitude, operating	–60.96 m to 3048 m
	(–200 ft. to 10,000+ ft.)
Altitude, nonoperating	–60.96 m to 12,192 m
(below mean sea level, max)	(–200 ft to 40,000+ ft)
Operational Shock (max at 0.5ms)	1500 Gs
Non-Operational Shock (max at 0.5ms)	1500 Gs
Vibration, random operating	20–2000 Hz:	16 Grms
Vibration, random nonoperating	20–2000 Hz:	16 Grms
Nonrecoverable read errors, max	1 LBA per 1016 bits read
Annualized Failure Rate (AFR)	0.44%
	To determine the warranty for a specific drive, use a web browser to
	access the following web page:
Warranty	support.seagate.com/customer/warranty_validation.jsp
	You will be asked to provide the drive serial number, model number (or
	part number) and country of purchase. After submitting this information,
	the system will display the warranty information for your drive.
Lifetime Power cycles	50,000
Supports Hotplug operation per	Yes
Serial ATA Revision 2.6 specification

*One GB equals one billion bytes when referring to drive capacity. Accessible capacity may vary depending on operating environment and formatting.

4 Pulsar Product Manual, Rev. A