Seagate ST950011FS, ST9200011FS manual Drive mounting, Mounting dimensions-top, side and end view

3.4Drive mounting

You can mount the drive in any orientation using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 3 for drive mounting dimensions. Follow these important mounting precau- tions when mounting the drive:

•Allow a minimum clearance of 0.030 in (0.76 mm) around the entire perimeter of the drive for cooling as a guideline. Please refer to Section 3.5 for final cooling requirements.

•Use only M3 x 0.5 metric mounting screws.

•Four (4) threads (0.080 in) minimum screw engagement recommended. Also ensure maximum screw length does not bottom out in mounting holes.

•Do not overtighten the mounting screws (maximum torque: 4.5 in-lb, ± 0.45 in-lb).

Figure 3. Mounting dimensions—top, side and end view

Pulsar Product Manual, Rev. A 21