4.3Supported ATA commands
The following table lists Serial ATA standard commands that the drive supports. For a detailed description of the ATA commands, refer to the Serial ATA: High Speed Serialized AT Attachment specification. See “S.M.A.R.T. commands” on page 35.for details and subcommands used in the S.M.A.R.T. implementation.
Table 7: Supported ATA commands
Command name | Command code (in hex) |
|
|
Check Power Mode | E5H |
Data Set Management with Trim Support | 06H |
Download Microcode | 92H |
Execute Device Diagnostics | 90H |
Flush Cache | E7H |
Flush Cache Extended | EAH |
Identify Device | ECH |
Idle | E3H |
Idle Immediate | E1H |
Initialize Device Parameters | 91H |
Read Buffer | E4H |
Read DMA | C8H |
Read DMA Extended | 25H |
Read FPDMA Queued | 60H |
Read Log Ext | 2FH |
Read Multiple | C4H |
Read Multiple Extended | 29H |
Read Native Max Address | F8H |
Read Native Max Address Extended | 27H |
Read Sectors | 20H |
Read Sectors Extended | 24H |
Read Verify Sectors | 40H |
Read Verify Sectors Extended | 42H |
Security Disable Password | F6H |
Security Erase Prepare | F3H |
Security Erase Unit | F4H |
Security Freeze | F5H |
Security Set Password | F1H |
Security Unlock | F2H |
Set Features | EFH |
Set Max Address | F9H |
Pulsar Product Manual, Rev. A | 25 |
