Section 1. Introduction

The AquaSEAL™ AS-1600is a medium to large format media liquid laminator used to coat graphics with a protective sealant. Operating roll to roll, the media is threaded under the applicator mechanism, under the drying assembly, and onto the take-up roller. During operation, the liquid laminator applies sealant onto the printed graphics and then cures and dries it before winding the media onto the take-up core.

Hardware Overview

Figure 1.1 shows the front view of the liquid laminator. Major components (safety items shown in red) include the following:

Dam Stop Assembly

Draw Down Assembly

Unwind Mandrel

Sealant Tank

Dryer Panel

 

Applicator Nozzle

Drip Tray

Figure 1.1 AquaSEAL™ AS-1600Liquid Laminator Front Views

6

Page 7
Image 7
SEAL AS-1600 operation manual Introduction, Hardware Overview