![](/images/new-backgrounds/1010330/1033027x1.webp)
5, HOW TOCHANGE
t
Print Head
__Card Holder
PRINTWHEEL
1.Removing Printwheel
1)Turn off the machine. Open the Top Cover and remove the Ribbon Cassette as explained under "Removing Rib- bon Cassette".
2)Pull the Printwheel Set/Release Lever towards you.
3)Lightly grasp the top of the Printwheel and carefully pull it up towards you.
2.Installing Print_eel
1)Ughtly grasp the edge of the Pdntwheel and carefully lower it in between the Card Holder and the PMnt Head.
QMake sure that the typeface (the side with typing style indicated) faces the Platen.
2)Press the Printwheel Set/Release Lever away from you until it snaps into place, locking the Mechanism.
•Press the Lever as far as it goes again to make sure the Printwheel has been locked into place.
3)Replace the Ribbon Cassette and close the Top Cover.
•Remount the Printwheel if any abnormal noise is heard or if incorrect characters are printed.
9