![](/images/new-backgrounds/1010562/1056219x1.webp)
I | IIII | IMH | I | HI | I | II |
INSERTING BOBBIN INTO BOBBIN CASE
®
, With the bobbin case in your left hand, place the bobbin into it with the thread running clockwise.
* Feed the thread through the slot in the case.
3. Pull the thread under the tension plate.
4. Draw 3 to 4 inches of thread from bobbin,
INSERTING BOBBIN CASE INTO SHUTTLE
i
With locating pin straight up, hold the | . | Make sure the | locating pin | fits | into | the |
latch open, and slide the bobbin case on |
| locating groove | at the top of | the | shuttle. | |
to the center spindle of the shuttle. |
| Release the latch to lock the | bobbin | case | ||
|
| into place. |
|
|
|
|
9