Using Your TV and Remote
With a Satellite Receiver: Basic Operation
You may also be able to use the TV's remote with satellite receivers. Refer to your Satellite Receiver owner's manual to hook up your Satellite Receiver. The
remote may need to be programmed for other brands of satellite receivers, but may not operate all models of the brands listed below. Use the codes below or on the sheet packed in with your remote.
Follow the instructions below for basic operation of your receiver. You may also want to experiment with other buttons on the remote to see if they work with your receiver.
Program the remote for your
Satellite Receiver
VO_NEp. VCR1 SAT=CABLE TV
VCR2eLDooAUDIo )
O0
REW PLAYFF
RECSTOPPAUSE
DISPLAYSKIP
Turn on the Satellite
Receiver
MUTE | CHA_ | PREV CH |
Turn off the Satellite
Receiver
INPUTQ | 0 0 | ANTENNAo |
CLEAR ._x.__.,O,pO. RESET
Satellite Receiver Codes
Chaparral | 80,81 | |
Cheyenne | 81 | |
Drake | ................................. | 82,83 |
DSS | 00 | |
General | Instruments | ...92,93,94 |
RCA | 00 | |
Realistic | 84 | |
Sierra | I,II,III | 81 |
STS1 | 85 | |
STS2 | 86 | |
STS3 | 87 | |
STS4 | 88 | |
Toshiba | ................................... | 89 |
Uniden | .................................... | 90 |
Video | Cipher II | 91 |
A. Point the remote at the satellite receiver and hold SAT,GABLE.
B. Enter the code for your brand from the code list below.
C. Release SAT,CABLE.
D. Press POWER. If nothing
happens, try pressing SAT.CABLE and then POWER.
A. Press SAT, CABLE to set the remote to control the satellite receiver.
B. Press POWER to turn on the receiver if it did not turn on
when you pressed SAT.CABLE.
A. Press SAT, CABLE to set the remote to control the Satellite receiver.
B. Press POWER to turn off the receiver.
11
