Sears 274.4394859 owner manual With Audio Equipment Programming and Basic Operation, Audio Codes

Using Your TV and Remote

With Audio Equipment: Programming and Basic Operation

Refer to the Connection Book or your Audio equipment owner's manual to hook up your audio equipment. Your remote controls some audio equipment such as a radio, CD player, tape player, turntable, or amplifier. The remote may

need to be programmed for your equipment, but may not operate all models of the brands listed below. Use the codes below or on the sheet packed in with your remote.

Program the remote for audio equipment

90_E _ VCRI SAToCABL E TV

VCR2°LD AUDIO

OQ

REW PLAYFF

REC SlOP PAUSE

DISPLAYSKiP

Basic Operation MUTE CHA_4 PREV CH

A.Point the remote at the audio equipment and hold AU DID.

B.Enter the code from the code list.

C.Release AUDIO.

D.Press POWER to turn it on. If

nothing happens, try pressing AUDIO and then POWER.

E.Repeat A-D with another code if the first one does not work.

a.Point the remote at the audio equipment and press AUDIO.

B.Press POWER to turn it on.

C.Use the buttons on the remote that relate to audio functions.

Not all buttons highlighted may work with your equipment.

D.Turn the audio equipment off using the audio component's power off button.

Audio Codes

RCA/Dimensia		.:1
AM/FM	03	I:
CD	07	}"
Tape	06	liii
Phono	05

15