STORAGE
1.To store the 1215 Orbital Rower, simply keep it in a clean dry place.
2.Fold The REAR SUPPORT(16) for easy storage, refer to page 11.
3.Grasp the Front and Rear Stabilizer to move the 1215 Orbital Rower. Do not use the Seat to move the 1215 Orbital Rower. The Seat will move and the Seat Carriage may pinch your hand or fingers.
4.To avoid damage to the electronics, remove the batteries before storing the 1215 Orbital Rower for one year or more.
MAINTENANCE
The safety and integrity designed into the 1215 Orbital Rower can only be maintained when the 1215 Orbital Rower is regularly examined for damage and wear. Special attention should be given to the following:
1.Pull on the HANDLEBARS(8, 9) and verify that the SHOCKS(14) provide tension. The SHOCKS(14) should provide many years of use.
2.Clean the roller tracks in the CENTER BEAM(1) with an absorbent cloth.
3.Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts. Tighten loose nuts and bolts.
4.Verify that the CAUTION LABEL(60) is in place and easy to read. Call Stamina Products immediately at
5.It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6.Worn or damaged components shall be replaced immediately or the 1215 Orbital Rower removed from service until repair is made.
7.Only Stamina Products supplied components shall be used to maintain/repair the 1215 Orbital
Rower.
8.Keep your 1215 Orbital Rower clean by wiping it off with an absorbent cloth after use.
13
