CARTON CONTENTS

1.

Hitch Tube (#44586)

6.

Flow Control Rod (#44469)

2.

Flow Control Arm (#24859)

7.

Drive Wheel (#48865)

3.

Hitch Bracket (#23687)

8.

Wheel (#46503)

4.

Flow Control Mount Bracket (#24855)

9.

Hopper Assembly

5.Braces (2) (#23525)

 

1

2

3

 

 

4

 

 

 

5

6

 

 

 

7

8

9

 

 

 

ASSEMBLY

TOOLS REQUIRED FOR ASSEMBLY

(1)Pliers

(2)7/16" Open or Box End Wrenches

(2)1/2" Open or Box End Wrenches

(1)Small Hammer

STEP 1: (SEE FIGURE 1)

•Turn the spreader upside down so that it rests on the hopper.

STEP 2: (SEE FIGURE 2)

•Remove lock nut from the middle bolt in the crossover tube and shaft support plate. Leave the bolt in place.

•Assemble the short end of the hitch tube onto the middle bolt and secure it with the same lock nut you removed. Do not tighten at this time.

•Assemble two hitch braces to inside of hopper frame, one on each side, using two 1/4" x 1-1/2" hex bolts and two 1/4" nylock nuts. Do not tighten at this time.

•Assemble the two hitch braces to the hitch tube using a 1/4" x 1-1/2" hex bolt and a 1/4" nylock nut. Do not tighten at this time.

IMPORTANT: The hitch tube must attach to the side of the crossover tube opposite the shaft support plate.

SHAFT SUPPORT PLATE MIDDLE BOLT

HITCH

TUBE

1/4" x 1-1/2"

1/4" NYLOCK

HEX BOLT

NUT

CROSSOVER TUBE

MIDDLE LOCK NUT

FIGURE 1

HITCH BRACE

HITCH BRACE

FIGURE 2

4

Call 1-866-576-8388 for missing parts or assembly help

 

DO NOT RETURN TO STORE