STEP 7: (SEE FIGURE 7)

•Assemble the flow control link (end with small hole) to the flow control arm using a 1/4" x 1" hex bolt, a nylon washer and a 1/4" nylock nut. Tighten carefully. The flow control link should not be loose but should pivot with no more than slight resistance.

FLOW CONTROL

STEP 9: (SEE FIGURE 9)

•Place a 5/16" flat washer onto the end of the flow control rod. Insert the end of the rod through the slot in the flow control mounting bracket and through the hole in the flow control link. Secure with a 3/32" x 3/4" cotter pin.

3/32"

LINK

FLOW

COTTER

CONTROL

ARM

1/4" x 1"

HEX BOLT

1/4" NYLOCK

NUT

SMALLEST

HOLE

NYLON

WASHER

FIGURE 7

STEP 8: (SEE FIGURE 8)

•Assemble the flow control arm to the flow control mounting bracket using a 1/4" x 1" hex bolt, two nylon washers and a 1/4" nylock nut. Tighten carefully.

The flow control arm should be snug, but should pivot with no more than a slight resistance.

•Assemble the vinyl grip.

VINYL GRIP

FLOW

FLOW CONTROL

MOUNTING

CONTROL

BRACKET

ARM

 

1/4" x 1"

HEX BOLT

1/4" NYLOCK

NUT

(2)NYLON WASHERS

FIGURE 8

PIN

5/16" FLAT

WASHER

FLOW

CONTROL

ROD

SLOT

FLOW

CONTROL

LINK

FIGURE 9

STEP 10: (SEE FIGURE 10)

•Hook free end of flow control rod through hole in slide gate bracket located near the bottom of the hopper.

FIGURE 10

6

Call 1-866-576-8388 for missing parts or assembly help

 

DO NOT RETURN TO STORE