Sears 536.25587 owner manual Service And Adjustments, See Fig+, See Figs. 30A and 30B

Models: 536.25587

1 74
Download 74 pages 54.38 Kb
Page 27
Image 27
TO REPLACE MOWER BLADE DRIVE BELT

SERVICE AND ADJUSTMENTS

TO REPLACE MOWER BLADE DRIVE BELT

(See Fig+ 29)

eRemove mower deck (see TO REMOVE MOWER DECK in this section,

e Remove mower deck belt guard

Note position of belt retainer on idler pulley so it can be can be repositioned properly after belt installation Loosen idler pulley.,

®Remove old belt and replace with a new original equipment belt

eReinstall belt guard,.

@Reposition belt retainer and re-tighten idler pulley,,

Reinstatl mower deck assembly,

Adjust belt (see TO ADJUST TRACTOR DRIVE BELT below)+

TO ADJUST TRACTOR DRIVE BELT

(See Figs. 30A and 30B)

The drive belt is kept tight by a spring attached to the brake- clutch pedal assembly When the drive beft is properly adjusted, the brake+clutch pedal shoutd appear as shown in fully released position.,

®The brake-clutch pedal should appear as shown in Fig, 30A when in the futly reteased position, iI not, then the foftowing adjustment is necessary.

eDepress the brake-clutch pedal enough to latch the parking brake in the 3rd notch

eLoosen clutching idler pulley mounting screw,

eIf brake+clutch pedal was too far forward, slide idler pulley in toward engine pulley, If pedal was too far rearward, slide idler pultey away from engine pulley.

eRe-tighten idler pulley mounting screw., NOTE: Belt

retainer should point toward position where running board meets main frame,

Release brake+clutch pedal and re-check pedal for proper position and readjust if necessary.

eCheck tractor brake adjustment (see TO ADJUST TRACTOR BRAKE in this section),

MOWER DECK

ENGAGEMENT CABLE

MOWER CLUTCH

CABLE SPRING

IDLER PULLEY

BELT RETAINER

PULLEY

MOWER DECK

DRIVE _BELT

Fig+29

PEDAL

BRAKE,-CLUTCH

Fig, 30A

BELT RETAINER

CLUTCHING

IDLER

PULLEY

MOUNTING

SCREW

CLUTCHING iDLER PULLEY

BRAKE-CLUTCH

PEDAL

PARKING BRAKE

LEVER

3rd

NOTCH

Fig,,30B

27

i,

Page 27
Image 27
Sears 536.25587 owner manual Service And Adjustments, See Fig+, See Figs. 30A and 30B, To Replace Mower Blade Drive Belt