Thissnowthroweris equippedwithtwoheightadjust-

meritskids,locatedonthe outside of the auger housing

(See Fig 21) These skids elevate the front of the snow thrower

For normal hard surfaces, such as a paved driveway or walk, adjust the skids as follows:

•Check tire pressure (14 to 17 pounds)

•Place the extra shear bolts supplied (found in parts bag) under each end of the scraper bar near but not under the skid

•Loosen the skid mounting nuts (See Fig 21), and adjust the skids to allow the front of the snow thrower to rest on the shear bolts Retighten the mounting nuts,

•Set the skid on the other side at the same height

NOTE: For graveled or uneven surfaces, raise the front of the snow thrower by moving the skids down This wilt help prevent rocks and other debris from being picked up and thrown by the auger

TO ADJUST SCRAPER BAR

After considerable use, the metal scraper bar wilt have a definitewearpattern The scraperbarinconjuncfionwith the skids should be adjusted to allow tt8" between the scraper bar and the sidewalk or area to be cleaned The scraper bar may have to be returned to its original lower setting to maintain the original pertormance level To adjust:

•Position the snow thrower on a level surface

•Make sure both tires are equally inflated Propertire pressure is 14 to 17 PSI See side of tire {or maximum inflation Do not exceed sidewall maxi- mum pressure on tire

•Loosen the carriage bolts and nuts securing lhe

scraper bar to the auger housing

-"

o Adjust the scraper bar to the proper position

•Tighten the carriage bolts and nuts, making sure

that the scraper bar is parallel with the working surface

For extended operation, the scraper bar may be reversed lflhe scraper bar must be replaced due to wear, remove the carriage bolts and nuls and install a new scraper bar

SKID MOUNTING NUTS

AUGER HOUSINGHEIGHT ADJUST SKID

FIG. 2t

..........................._i ii i in nllU

CAUTION: BE CERTAIN TO MAINTAIN

PROPER GROUND CLEARANCE FOR

YOUR PARTICULAR AREA TO BE

CLEARED, OBJECTS SUCH AS GRAVEL,

STONES OR OTHER DEBRIS, IF STRUCK

BY THE IMPELLER, MAY BE THROWN

WITH SUFFICIENT FORCE TO CAUSE

PERSONAL INJURY, PROPERTY DAM-

AGE OR DAMAGE TO THE SNOW

THROWER..

i

,

,i

,,,

i i

TO ADJUST CHUTE

CRANK ASSEMBLY

If you cannot rotate the chute crank fully to the left and to the right, you need to adjust the chute crank (See Fig 22)

oLoosen both t/2" nuts on the crank adjusting rod (using 3/4" wrenches)

•Rotate the adjusting rod in or out to allow about t/8" clearance between the notch in the flange and the outer diameter o! the worm

eOnce this clearance is set, tighten the nuts

NOTE: Be sure the crank does not touch the side of the engine or the cover will be scratched

PLASTIC\.

 

NOTC.EO.SECT ON

CAP

COTTER

_

"_,_._

_.

PiN

/h/8

INCH CLEARANCE] .__,..-..-..

FL

_

'-.,.-zt \ \ /z Z"_

112 iNCH

C.AN ,,ORO0.',ST,NO

 

"

WORM

 

FIG,, 22

17

Page 16 Page 18
Page 17
Image 17
Sears 536.886531 owner manual To Adjust Scraper BAR, To Adjust Chute Crank Assembly, Plastic
Page 16 Page 18

536.886531 specifications

The Sears 536.886531 is a noteworthy addition to the realm of household appliances, particularly in the category of tabletop kitchen appliances. Designed to simplify cooking processes, it stands out due to its innovative features and user-friendly interface. This appliance is particularly known for its versatility, serving multiple functions that cater to modern cooking needs.

At its core, the Sears 536.886531 incorporates advanced technologies that enhance its performance and efficiency. One of its main features is the adjustable temperature control, allowing users to customize settings based on the specific dish being prepared. This range of control is critical for achieving optimal results, whether it’s grilling, baking, or steaming.

The cooking surface is designed for even heat distribution, which is essential for preventing hotspots that can lead to uneven cooking. With a non-stick coating, cleaning the surface becomes effortless, reducing the hassle typically associated with kitchen cleanup. Additionally, this appliance is built with safety features such as cool-touch handles and an automatic shut-off function, ensuring peace of mind during use.

Another characteristic that sets the Sears 536.886531 apart is its compact size. Designed for ease of storage and portability, it fits seamlessly into various kitchen spaces without taking up too much real estate. This size makes it an ideal choice for those in smaller living environments, such as apartments or dorms.

Moreover, the ease of operation is a significant selling point. With simple controls and an intuitive layout, users can quickly familiarize themselves with the appliance, making it accessible even for those who may not be experienced in the kitchen.

Compatibility with a variety of cooking recipes further enhances its allure. From breakfast favorites like pancakes to dinner options such as grilled vegetables, the Sears 536.886531 is versatile enough to accommodate an array of culinary endeavors.

In conclusion, the Sears 536.886531 combines innovative technology, safety features, and user-friendly design to create a standout kitchen appliance. Its adaptability for different cooking methods and ease of use make it an excellent addition for both novice and experienced cooks. This appliance not only aims to meet the demands of modern cooking but also enhances the overall culinary experience.
Top Page Image Contents