Dell T105 owner manual Secure the I/O panel assembly by replacing the screw. See Figure

2Secure the I/O panel assembly by replacing the screw. See Figure 3-30.

3Secure the I/O panel ribbon cable through the clips beneath the 3.5 optional diskette drive and on the side of the power supply shroud, and connect the I/O panel ribbon cable to the new I/O panel connector. See Figure 3-31.

Figure 3-31. Cabling the I/O Panel Assembly

	4	5	1
	3
				2
1	I/O panel connector		2	I/O panel assembly
3	4-pin power cable to system board		4	cable clip on power supply
5	I/O panel ribbon cable

4Replace the large processor cooling fan. See "Replacing the Cooling Fans" on page 86.

Installing System Components

99