Dell T105 owner manual Attachment SATA device such as hard drive, CD drive

Table 2-2 through Table 2-9 lists the options and descriptions for each group of information fields that appear on the main System Setup program screen.

NOTE: The options for the System Setup program change based on the system configuration.

NOTE: The System Setup program defaults are listed under their respective options, where applicable.

Table 2-2. Main System Options

Option	Description
System Time	Resets the time on the system’s internal clock.
System Date	Resets the date on the system’s internal calendar.
Memory Information	See "Memory Information Screen" on page 35.
CPU Information	Displays information for the processor installed in the
	system. See "CPU Information Screen" on page 36.
SATA Configuration	Enables or disables a Serial Advanced Technology
	Attachment (SATA) device (such as hard drive, CD drive,
	or DVD drive). See "SATA Configuration Screen" on
	page 36.
Boot Sequence	Determines the order in which the system searches for
(Diskette drive default)	boot devices during system startup. The default boot
	sequence is as follows: the diskette drive, hard drive, SATA
	CD-ROM drive, USB devices, and embedded NICs.
	Use the + or – keys to navigate through the list of devices
	and the space key to disable or enable the device. A V next
	to the device indicates that the boot device is enabled.
	NOTE: At least one device must be enabled for the system to
	boot. If all devices are disabled, an error message notifies
	you to enable at least one of the devices.
Hard-Disk Drive	Displays the sequence of the bootable hard-disk device
Sequence	models, beginning with the embedded SATA device on
	Port A. Use the + or – keys to change the device sequence.
Integrated Devices	Displays the settings for integrated devices. See "Integrated
	Devices Screen" on page 37.
System Security	Displays the settings for security devices. See "System
	Security Screen" on page 38.

34

Using the System Setup Program