Diskette Drive

Figure 3-5. Removing and Replacing the Blank Drive Insert

3

2

1

1

tab

2

blank drive insert

3

drive blank alignment screw

 

 

Diskette Drive

The 3.5-inch drive bay supports an optional standard diskette drive.

Removing the Diskette Drive

CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge.

1Turn off the system and attached peripherals, and disconnect the system from the electrical outlet.

2Open the system. See "Opening the System" on page 47.

3Remove the front drive bezel. See "Removing the Front Drive Bezel" on page 49.

52

Installing System Components

Page 52
Image 52
Dell T105 owner manual Removing the Diskette Drive