┌──5\LIBL/────────┐
CVTOVLPFM──────OVL──────┼───\CURLIB/──────┼────overlay─name───────────5
└───library─name──┘
┌─\FIXED──────┐
5──DTAFMT──────┤ ├──────────────────────────────────────────5
└─\CONTINUOUS─┘
┌5\CURLIB/─────┐ ┌──\VM────────┐
5──FILE────────┤ ├───────┼──\MVS───────┼───────────────────5
└─library─name─┘ └──file─name──┘
Required
─────────────────────────────────────────────────────────────────────────
Optional
┌─┐
┌─5\OVL─────────┐ │P│
5──MBR───┤ ├───────────────────────────────────────────┴─┴5
└──member─name──┘
┌─5\OVLTXT──────┐
5──TEXT──┤ ├──────────────────────────────────────────────5
└─'description'─┘
┌─5\NO ──┐
5──REPLACE─────┤ ├───────────────────────────────────────────────5
└──\YES──┘
┌─5\NO ──┐
5──CRTFILE─────┤ ├─────���─────────────────────────────────────────5
└──\YES──┘
(1) ┌5\BLANK────────┐
5──FILETEXT──┤ ├───────────────────────────────────────────
└─'description'─┘
(1) CRTFILE='\YES' only
┌────────────────────────────────────┐
│ Job: B/I Pgm: B/I REXX: B/I EXEC │
└────────────────────────────────────┘
Figure 42. The CommandSyntax for CVTOVLPFM Command
The following describes the parameters for CVTOVLPFM command.
Overlay (OVL)
Specifies the qualified name of the overlay that is converted to a
physical file member. This is a required parameter.
*LIBL
The library list is used to locate the overlay.
*CURLIB
The current library for the job is used to locate the overlay. If no
library is specified as the current library for the job, library QGPL is
used.
library-name
Specify the library where the overlay is located.
Format of data (DTAFMT)
Specifies how data is placed in a physical file member.
The possible values are:
Chapter 21. AFP Utilities for AS/400 Commands 379