The possible values are:
*PRV
Specifies that the name of the page segment and library used when
you performed this command last is used. If you specify *PRV for
the PAGSEG parameter, it is not necessary to specify a library.

page-segment-name

Specify the page segment name to be created.
The possible library values are:
*CURLIB
The current library for the job is used to create the page
segment. If no library is specified as the current library for the
job, library QGPL is used.
library-name
Specify the library in which the page segment will be created.
From file (FILE)
Specifies the qualified name of the physical file that contains the
member to be converted.
The possible values are:
*PRV
Specifies the file and library used when you previously created a
page segment of the same name.
file-name
Specify the name of an existing physical database file to be used. If
you do not specify a library name, *LIBL is used.
The possible library values are:
*LIBL
The library list is used to locate the file.
*CURLIB
The current library for the job is used to locate the file. If no
library is specified as the current library for the job, library QGPL
is used.
library-name
Specify the library where the file is located.
From member (MBR)
Specifies the name of the physical file member to be converted.
The possible values are:
*PRV
Specifies the member name used when you previously created a
page segment of the same name.
*PAGSEG
Specifies that the name of the page segment to be created is the
same as the name of the member.
374 AFP Utilities for AS/400 User’s Guide