'description'
Specify no more than 50 characters of text, enclosed in
apostrophes.
Replace (REPLACE)
Specifies whether or not the page segment replaces the existing page
segment if a page segment of the same name already exists in the
library.
The possible values are:
*YES
A new page segment is created and the old page segment is
replaced by it.
*NOA new page segment is not created if an old page segment of the
same name already exists in the library.
CVTPFMPAGS (Convert Physical File Member to Page Segment)
Command
This command allows you to convert a member in a physical database file to a
page segment. The member must contain IMDS (IMage Data Stream) format or
IOCA function set 10 image data.
Figure 41 on page 373 shows the command syntax for CVTPFMPAGS command.
372 AFP Utilities for AS/400 User’s Guide