Text 'description' (TEXT)
Specifies text that briefly describes the member and its function. The
description should be specified with no more than 50 characters of text
and enclosed in apostrophes.
The possible values are:
*OVLTXT
Specifies the same description of the overlay specified in the overlay
object.
'description'
Specify the description of the member.
Replace (REPLACE)
Specifies whether or not the physical file member replaces the existing
physical file member if a physical file member of the same name already
exists in the library.
The possible values are:
*NOA new physical file member is not created if an old physical file
member of the same name already exists in the library.
*YES
A new physical file member is created and the old physical file
member is replaced by it.
Create file (CRTFILE)
Specifies whether or not the file is created if the file does not exist.
The possible values are:
*NODo not create the file.
*YES
Create the file.
Text 'description' (FILETEXT)
Specifies text that briefly describes the file and its function. This prompt
is valid only when the CRTFILE parameter is *YES. The description
should be specified with no more than 50 characters of text and
enclosed in apostrophes.
The possible values are:
*BLANK
No text is specified.
'description'
Specify the description of the file.
Note: Before you use an overlay in the target system, you have to verify that the
necessary resources to use that overlay (for example, font and page
segment), are in the target system. Only transferring an overlay may be
insufficient. You also have to check the version and the supported
structured fields of the target system's PSF*.
Chapter 21. AFP Utilities for AS/400 Commands 381