Field Name Description
Text 'description' Specifies text that briefly describes the member and its function. The
description should be specified with no more than 50 characters of text
and enclosed in apostrophes.
The possible values are:
*PSGTXT
Specifies the same description of the page segment shown in the
Page segment
field.

'description'

Specifies the description of the member.
Replace|Specifies whether or not a physical file member of the same name
|which already exists in the same file and library is to be replaced.
The possible values are:
NA new physical file member is not created if an old physical file
|member of the same name already exists in the file and library.
|Y A new physical file member is created which replaces the old
|physical file member.
Create file Specifies whether or not the file is created if the file does not exist.
The possible values are:
NDo not create the file.
YCreate the file.
Text 'description'
|Specifies text that briefly describes the file and its function. This prompt
|appears only when Y is specified in the

Create file

prompt. The
description should be specified with no more than 50 characters of text
and enclosed in apostrophes.
13=Change Page Segment Text

To change a page segment description text, do the following on the Work with

Page Segments display on page 343.

1. Type 13 in the

Opt

column beside the page segment for which you want to

change the description text.

2. Press Enter.

The CL command CHGOBJD will be called.

Chapter 20. Work with Page Segments Function 351