Option Description
8=Display
description Displays the description of a source overlay file. Type 8 in the
Opt
column beside the name of the source overlay file for which you want to
display its description. See “8=Display Description of Source Overlay
File” on page 92 for more information.
12=Work with
source overlays Starts working with source overlays in a source overlay file. Type 12 in
the
Opt
column beside the name of the source overlay file which
contains source overlays you want to work with. See Chapter 5, “Work
with Source Overlays” on page 59 for more information.
Columns
Specify one of the options in the
Opt
column and press Enter.
You can exit from this display by pressing F3 (Exit) or F12 (Cancel).
Column Description
Opt Specifies the number of the task in the
Opt
prompt beside the source
overlay file you want to perform the task with. You can type the same
option next to more than one source overlay file at a time, and you can
also type different options next to different source overlay files at the
same time.
File Shows a list of all the source overlay files in the specified library or
library list that meets the subset criteria. You can use the top position
in the list to type a source overlay file you want to create or select
another option.
Note: If a file meets the following four conditions, it is shown on the
Work with Source Overlay Files display as a source overlay file even if
it is not created as a source overlay file.
The file is a physical file
The file is not a source file
The file is not a DDM file
The record length is 80
It is recommended to use the file you created using the overlay utility.
Library The name of the library in which the source overlay file resides is
shown.
Text The text description of the source overlay file is shown.
Changed The latest date you changed a source overlay in the source overlay file
or you changed the description text of the source overlay file is shown.
Showing a Source Overlay File List
The source overlay files can be listed on the lower part of the display by specifying
the
Library
field and
File
field. When you want to change the contents of the list,
specify the name of file and library, and press the Enter key. You can page up or
down the list on the display by specifying the starting characters in the
Position to
prompt.
Note: When you specify either the
File
field or the
Library
field, you can not
specify the
Opt
column.
Chapter 6. Work with Source Overlay Files 85