The following describes the parameters for PRTPFDDTA command.
PFD file (PFDFILE)
Specifies the PFD definition file and library that contain the PFD
definition to be used.
The possible values are:

PFD-definition-file-name

Specify the name of an existing PFD definition file to be used. If
you specify the PFD-definition-file-name and a library name, Print
Format Utility searches the specified library for the PFD definition
file. If you do not specify a library name, *LIBL is used.
The possible library values are:
*LIBL
The library list is used to locate the file.
*CURLIB
The current library for the job is used to locate the file. If no
library is specified as the current library for the job, library QGPL
is used.
library-name
Specify the library where the file is located.
PFD definition (PFDMBR)
Specifies the name of the PFD definition to be used to print a database
file member.
The possible values are:
*FIRST
This is the default value. The first PFD definition in the PFD
definition file is used.

PFD-definition-name

Specify the name of the PFD-definition you want to use.
Database file (FILE)
Specifies the database file and library that contain the member to be
printed.
The possible values are:
*PFD
Specifies that the database file and library that are specified in the
PFD definition is printed.
file-name
Specify the name of an existing database file to be used. If you
specify the file-name and a library name, Print Format Utility
searches the specified library for the database file. If you do not
specify a library name, *LIBL is used.
The possible library values are:
*LIBL
The library list is used to locate the file.
362 AFP Utilities for AS/400 User’s Guide