The Confirm Delete of Elements display shows the list of the elements to be
deleted due to a change in the overlay specifications. The

Reason

column shows
why the element is to be deleted.
You can delete these elements by pressing Enter. If you do not want to delete
these elements, press F12 to cancel, then the Define Overlay Specifications display
appears.
Field Name Description
Mark Shows the element mark of the element to be deleted. The mark
consists of an asterisk (*), a character that shows the element type, a
three digit number (001 to 999), and a blank. The character for each
element type is:
T Text
L Line
B Box
C Barcode
S Pagesegment
G Graphics
Name Shows the element name that is specified on the Define Element Detail
display.
Position Across Shows the horizontal starting position of the overlay element.
Position Down Shows the vertical starting position of the overlay element.
Reason Shows the reason the element is to be deleted.
The values are:
Out of overlay
Either horizontal and/or vertical position of the element is not
within the size of the overlay.
If the element is text, bar code, or page segment, its
start position is outside.
If the element is line, box, or graphics, its bottom-right
corner is outside.
Not supported by printer type
The element uses a function that is not supported by the
specified printer type.
If the element is graphics, the printer does not support the
function to print graphics.
Work with Source Overlay Fonts
The Work with Source Overlay Fonts display appears. For the work with fonts
operation, see Chapter 14, “Work with Fonts” on page 289.
Design OverlayYou can design a source overlay on the Design Overlay display. In a source
overlay, you can define the following elements:
Text
Line
Box
Bar code
Page segment
Graphics
70 AFP Utilities for AS/400 User’s Guide