Dell T105 owner manual If you are replacing the hard drive cooling fan

If you are replacing the hard drive cooling fan:

1Align the bottom connectors on the replacement fan with the mounting holes in the system chassis.

2Squeeze the top two release tabs and maneuver the assembly forward so that it locks into place.

If you are replacing the processor cooling fan:

1Align the bottom connectors on the replacement fan with the mounting holes in the system chassis. Align the slots on the side of the replacement fan with the securing tabs on the chassis bracket mount.

2Slide the fan toward the front panel until it snaps into place.

3Secure the cables into the slots on the heat sink fan shroud to manage unwanted slack. See Figure 3-25.

4Attach the fan cable to the system board. See Figure 6-2 for the location of the connector.

Installing System Components

87