Dell T105 owner manual System Security Screen

Table 2-6. Integrated Devices Screen (continued)

OptionDescription

Embedded Gb NIC 1 Enables or disables the system's integrated NIC. Options

	are Enabled with PXE (the default) and Disabled. PXE
	support allows the system to boot from the network.
	Changes take effect after the system reboots.
MAC Address	Displays the MAC address for the integrated 10/100/1000
	NIC. This field does not have user-selectable settings.
Serial Port	Sets how the built-in serial port operates. When set to
	Auto, the built-in serial port automatically remaps to the
	next available port address if a duplicate port address is
	installed using a serial port expansion card.

System Security Screen

Table 2-7 lists the options and descriptions for the information fields that appear on the System Security screen.

Table 2-7. System Security Screen

Option	Description
System Password	Displays the current status of your system's password
	security feature and allows you to assign and verify a new
	system password. Default is Not Enabled.
	NOTE: See "Using the System Password" on page 40 for
	instructions on assigning a system password and using or
	changing an existing system password.
Setup Password	Restricts access to the System Setup program in the same
	way that you restrict access to your system using the system
	password feature. Default is Not Enabled.
	NOTE: See "Using the Setup Password" on page 42 for
	instructions on assigning a setup password and using or
	changing an existing setup password.
After Power Failure	Determines how the system reacts when power is restored
	to the system. If system is set to Last State (the default),
	the system returns to the last power state. On turns on the
	system after power is restored. When set to Off, the system
	remains off after power is restored.

38

Using the System Setup Program