Sears 758.14451 Water Fill, service personnel before plugging in, 3, ReleaSe the plunger

Water Fill

WARNING: To reduce the risk of shock, always unp ug:humtdifier before_ cleaning, Or servicing.

Close the control cover. If controls get wet let them dry completely and have unit Checked by authorized

service personnel before plugging in.

This humidifier is designed for use with the water bottle located under the bottle cover to the left of the fan assembly. The unit should be positioned where it will be operating.

To fill the whole house humidifier, close the control cover and remove the bottle cover. To remove the water bottle, lift the bottle straight up and out of the cabinet

]-he water bottle is designed with an "E-Z-Fill Side-Cap". Remove the "E-Z- Fill Side-Cap" on the side of the water bot- tle by twisting counterclockwise.

Place the opening of the water botUe under a water faucet (the bottle should fit under a four-inch Oearance faucet). Fill with recom- mended mixture of cold water and Sears BacterioStat #42:14900 only. Solid debris could make the valve leak.

tnstall the "E-Z-Fill Side-Cap" by twisting clockwise. Hand tighten only.

Check for possible leaks by performing

the following:

1.Grasp bottle handle and hold the bottle Upright over a sink. :

2_ Press up on valve cap plungerfor about one second to let out a littlewater.

3, ReleaSe the plunger.

i 4_ Listen for air bubbles. Look for leaks around _E-Z-Fill Side-Cap".

:51 !f you:hear air bubbles or see leaks, retighten "E-Z-Fill Side-Cap" and repeat

:Steps "t-4_

Wipe off excess water from the bottle. Position the water bottle back into the unit.

Turn Counterclockwise

_Valve

Cap Plunger

6