Grasp the water bottle handle, and lower into the cabinet The
Operating Humidifier Controls ........
The operating controls of your Kenmore Quiet Comfort whole house humidifier are located on the top right of the humidifier. The controls are found under the smoked control cover.
Lift the control cover by placing your finger in the round cutout and lifting. The cover will stay open. Nov; you can clearly see the control area. Familiarize yourself with the controls and reference the diagram of the control area for the correct naming used in this manual:
To Operate the Controls
Humidity Control:
Adjust the amount of humidity depending on your needs. The humidifier will turn on and off as required to maintain level of humidity selected. MEDIUM setting is rec- ommended, but there are times when tow or high amount of humidity may be pre- ferred. For constant operation of humidi- fier, MAX allows for the maximum amount of humidity to be evaporated into the air continuously.
IMPORTANT: Water damage may result if condensation starts to form on windows or walls. Humidity Control setting should be towered until condensation no longer forms.
Speed Control
The higher the air flow speed, the more water is evaporated and released into the air. Low speed is the quietest and is pro- vided for conditions that may not require as high an evaporation rate.
Fill Light
When the unit has a small amount of water left in it, the fill light wilt come on and the unit will automatically shut off.
Fan Control
Your Kenmore Quiet Comfort Whole House humidifier has a three speed fan contro[ switch. (Low, Medium and High) The maximum humidity output is obtained with the fan control on high.
\
°l /'/ le
".VJ,;
OMt, x
e _
SPEEDMI_D
O
RLIL
Humidifer Control
7
