Setting Cooktop Controls
Minute Timer
The Minute Timer feature may be useful in the kitchen if a recipe calls for keeping track of time. This feature will keep track of time from 1 to 99 minutes. The LED display located to the left of the Timer UP/DOWN arrow key pads will begin to count down minutes once set.
To Set the Minute Timer:
1.Touch the 
listed under the word “TIMER”. Touching and releasing the 
or the 
key pads will increase or decrease the Minute Timer setting by 1 minute with each key press (up to 99 minutes).
2.Once the Timer LED displays the desired amount of time, release the UP or DOWN Arrow key pads. The Minute Timer
LED will flash the time with a small dot to the right. Once the LED quits flashing and the dot disappears the MinuteTimer will begin the countdown with remaining minutes. Once the Minute Timer reaches 00 a long beep will
sound indicating that the time is up.
To Cancel the Minute Timer:
1.Touch the 
and 
key pads at the same time or touch and hold either the 
or 
key pad and scroll to 00.
2.If cancelling the Minute Timer using the scrolling method, once the Main Control LED reaches 00, release the Arrow key pad.
3.The LED will flash momentarily and then quit flashing. The set time will disappear from the LED indicating that the MinuteTimer is no longer active.
Locking the Controls
The Induction Cooktop may be locked in order to prevent the cooktop from accidentally being turned ON.
To Turn ON the Controls Lock Feature:
1.The Cooktop Lock will not activate until the cooktop is OFF. If the cooktop power is not OFF, touch and hold the 
key pad until a beep sounds (about 1 second). The Power Indicator light located above the 
key pad will turn OFF.
2.Touch the 
key pad until a beep sounds (about 5 seconds). The Lock Indicator Light above the 
key pad will turn ON indicating the cooktop is locked. This will keep any Cooking Zone or Cooktop functions from being accidentally turned ON (See Fig. 5)
To Turn OFF the Controls Lock Feature:
1.Touch the 
key pad until a beep sounds (about 5 seconds). The Lock Indicator Light above the 
key pad will turn OFF indicating the cooktop is unlocked. The Cooking Zones or any of the other Cooktop functions may now be used (See Fig. 4).
2.If the cooktop is needed you must touch and hold the 
key pad until a beep sounds (about 1 second). The Power
Indicator Light located above the 
key pad will turn ON. (See Fig. 7). You may now activate any of the Cooking Zones.
ENGLISH
11
