9. Hold one ofthe Pedal Shafts (38) withthe included tool as shown---the toolmust be between the coils of the
Pedal Spdng (52). Usingan adjustable wrenoh, remove the 1/2" NylonLock Nut (46)f_n"tll_ end of the Peda
Shaft. (There is an 11116"Spdng Washer (51), aPedal Spring (52), an 11/16" Washer 154), a Pedal Bushing
155),a9/'16" Washer (56) and a 9/16" Pedal Spacer(75) on the Pedal Shaft.)Using the included tool, _rmty :t__.._T,_
tighten the Pedal Shaft, In aclockwise direction, into one of the arms of the Crank127). While holding the Pedal
Shaft withthe tool, use an adjustable wrench to tighten the 1/'2" Nylon Lock Nut (46) onto the endof the Pedal
Shaft. (There is a 5/16" Washer (65) and a 5/16" Pedal Nut (49) on the other end of the Pedal Shaft. The 5116"
Pedal Nut (49) must be flush with the end of the Pedal Shaft.) Press aPedal Cap (50) intothe Pedal (10).
Attach the other Pedal Shaft to the other arm of the Crank in the same manner (not shown).
9
) 49
52 Tool
55 66 . 75
7