Sears 831.287602 Exercise Monitor Modes, Exercise Monitor Operation, Turning the Power OFF

EXERCISE MONITOR MODES

:-The exercise monitor features five different modes: _.::-_

SPEED--Displays _ou?p_daling speed, in miles per "

hour..: ......

TIME--Displays the elapsed time. Note: Time will be

counted only while you are pedaling, if you stop for ten seconds or longer, the TIME mode will hold until you resume pedaling.

DISTANCE--Displays the total distance you have pedaled, in miles.

CALORIE--Displays the total number of Calodes you have burned. Note: If the pedaling resistance is near the.lowest or highest setting, the actual number of Calodes you have burned will be slightly lower or .-- higher than the number displayed.

SCAN--Displays the SPEED, TIME, DISTANCE and CALORIE modes, for five seconds each, in a repeating

cycle.

EXERCISE MONITOR OPERATION

whenthe power is turned 0n, _he SCAN mode wi) be "_:_" belected automatically; One mode indicator will appear:

y t_e'word"SCAN." The SPEED, TIME, DISTANCE and CALORIE modes Willbe displayed in a repeating cycle. A second mode indicator will show which mode is currently displayed.

If desired, the SPEED, TIME, DISTANCE or CALORIE •

mode can be selected for continuous display by repeatedly pressing the display mode button. The

modes will be selected in the following order:.SPEED,

TIME, DISTANCE, CALORIE, SCAN.

To reset the LCD display, turn the.power off end then on again by pressing the power button twice.

TURNING THE POWER OFF

When you am finished exercising, press the power button to turn the power off. Note: li'the pedals are not moved end the controls are not used for four minutes, the power will turn off automat[celly.

10