QSC Audio M PL-9.0PFC Technische Daten, Especificaciones, S P E C I F I C A T I O N S, 1600, 1950

	S P E C I F I C A T I O N S			S P É C I F I C A T I O N S		TECHNISCHE DATEN	ESPECIFICACIONES
	PowerLight 6.0PFC					PowerLight 9.0PFC
OUTPUT POWER, in watts
20 Hz–20 kHz
8Ω per channel	1400 (@ 0.1% THD)					1800 (@ 0.2% THD)
4Ω per channel	2500 (@ 0.1% THD)					3200 (@ 0.2% THD)
2Ω per channel	3250 (@ 0.1% THD)
EIA: 1 kHz @ 1% THD
8Ω per channel	1600				1950
4Ω per channel	2800				3400
2Ω per channel	3500				4500
Bridged Mono:
16Ω, 1 kHz @ 1% THD	3200				3900
8Ω, 1 kHz @ 1% THD	5600				6800
4Ω, 1 kHz @ 1% THD	7000				9000
DYNAMIC HEADROOM		0.77 dB at 4Ω
DISTORTION	<0.06%: 8Ω, 4Ω, & 2Ω, @ 10 dB below rated power					<0.15%: 8Ω, 4Ω, & 2Ω, @ 10 dB below rated power
THD 20 Hz–20 kHz
8 & 4Ω, 20 Hz–2 kHz	<0.02%: 1400 W @ 8Ω; 2500 W @ 4Ω					<0.03%: 1800 W @ 8Ω; 3200 W @ 4Ω
2Ω, 20 Hz–2 kHz:	<0.02%: 3250 W @ 2Ω					<0.05% 20 Hz–2 kHz; 4500 W @ 2Ω
SMPTE-IM		Less than 0.02%
FREQUENCY RESPONSE		20 Hz to 20 kHz, ±0.15 dB
(at 10 dB below rated output power)		2 Hz to 50 kHz, +0/-3 dB
DAMPING FACTOR	Greater than 2000 (1 kHz and below)
NOISE (unweighted)				107 dB below rated output (20 Hz to 20 kHz)
VOLTAGE GAIN		40× (32 dB)
INPUT SENSITIVITY, VRMS rated power @ 8Ω	2.6 Vrms (+10.6 dBu)					3.0 V rms (+11.8 dBu)
rated power @ 4Ω	2.5 Vrms (+10.2 dBu)					2.8 V rms (+11.2 dBu)
INPUT IMPEDANCE		10 kΩ unbalanced
		20 kΩ balanced
CONTROLS		Front: AC switch, Ch. 1 and Ch. 2 gain knobs, Ch. 1 and Ch. 2 clip limiter switches
		Rear: Parallel/Stereo/Bridge switch, remote power supply enable terminals
INDICATORS (each channel)	PROTECT:	Red LED		CLIP:	Red LED
	STANDBY:	Yellow LED		-10 dB:	Yellow LED
	POWER:	Green LED		-20 dB:	Yellow LED
				SIGNAL:	Green LED
CONNECTORS		Input:	"Euro-style" barrier strip; Neutrik “Combo” XLR and
			¼" (6.3 mm) TRS, tip and pin 2 positive
		Output:	“Touch-Proof” binding posts, 60A rated;
			Neutrik Speakon™ connectors (1 per channel)
		Data Port: HD 15 female connector for QSControl MultiSignal Processor

23