OVENCONTROL,CLOCKand KITCHENTIMERcontinued
Your new control has a series of tones that will
•sound at different time& These tones may sound while you set the control for an oven function, or at the end of the oven function, it will also alert you there may be a problem with
the functions. Below are the types of tones and a brief description of each
TONES WHILE SETTING THE
CONTROL
When .you press a touch pad you will hear a beepA This beep will let you know you have placed enough pressure on the pad to activate it. (The arrow pads do not beep,)
END OF TIMED CYCLE TONE
At the end of a timed cooking function, you will hear 3 short beeps followed by I beep every 6 seconds,, This 6 second beep will continue to sound until the CLFd&R/OFF pad is pressed or you may select the special feature to cancel this 6 second beep from sounding at the end of future cycles,
TO CANCEL THE 5 SECOND BEEP
t.Press and hold the BAKE and BROIL
pads, at the same tKrne for 3 seconds, until the display shows "SF"_
2. Press the KITCHEN TIMER ON!OFF pad, The displaywill show "CON BEEP" (continous beep),
3. Press the KITCHEN TIMER ON/OFF pad again. The display will show"BEEP" (beep canceled),
4.Press the START pad
ATTENTION TONE
This tone will sound ff you make an error or an
oversight is made while setting an oven function_
Examples would be: ...................
a, Setting a function and not pressing the START pad,
b, Pressing an additional function pad without setting a temperature or time first.
Any of these can be quickly identified by watching the display
PRENEA T TONE
When .you set an oven temperature, the oven
automatically starts to heat_ When the
temperature inside the oven reaches the temperature.you have set, a tone will sound to let you know the oven is ready for baking
If you set an oven function and the control beeps while the display is flashing "F" and a number "F.4" or letter "FI" there may be a problem with the control or oven Simp!y press
the CLEAR/OFF pad and wait about an hour. Try setting the function again1 If the code
repeats, write down the flashing code and call
for service., Tell the technician what the code was flashing,
tf you would like to return the 6 second beep repeat steps above until the display shows ,your choice and press start°
9
